-
Spring steel wire
Spring steel wire Spring steel wire is a kind of steel wire used to make springs (SPRING) or wire forms (WIRE FORM). According to the different uses of springs, there are many types of spring steel wires required for making springs, such as spring steel wires for mattress springs (referred to as ...Read more -
Introduction to several key aluminum foil products
Introduction to several key aluminum foil products (I) Air conditioning foil Air conditioning foil is a special material for manufacturing heat exchanger fins for air conditioners. The air conditioning foil used in the early days was plain foil. In order to improve the surface performance of plai...Read more -
Advantages of various materials of stainless steel bars
Advantages of various materials of stainless steel bars 316L stainless steel bars: 316 stainless steel contains molybdenum and low carbon content, and its pitting corrosion resistance in the ocean and chemical industrial environment is much better than 304 stainless steel! (316L low carbon, 316N ...Read more -
Stainless steel wire
Stainless steel wire Stainless steel is a high alloy steel that can resist corrosion in air or chemical corrosive media. Stainless steel has a beautiful surface and good corrosion resistance. It does not need to be treated by surface treatment such as plating, but exerts the inherent surface prop...Read more -
Stainless steel bar
Stainless steel bar Stainless steel bar is a material made by hot rolling or forging stainless steel ingots. According to different classification standards, stainless steel bars can be divided into many types. Round steel, square steel, flat steel, hexagonal steel and octagonal steel are collect...Read more -
Duplex stainless steel
Duplex stainless steel refers to a material whose microstructure is composed of ferrite and austenite, each accounting for about 50%. In actual use, it is more appropriate for one of the phases to be between 40-60%. According to the characteristics of the two-phase structure, by properly controll...Read more -
Alloy steel
Alloy steel Classification of alloy steel According to alloy element content Low alloy steel (total alloy element is less than 5%), medium alloy steel (total alloy element is 5%-10%), high alloy steel (total alloy element is higher than 10%). According to alloy element composition Chromium steel ...Read more -
304 stainless steel sheet and coil
304 stainless steel sheet and coil 304 stainless steel grades: 0Cr18Ni9 (0Cr19Ni9) 06Cr19Ni9 S30408 Chemical composition: C: ≤0.08, Si: ≤1.0 Mn: ≤2.0, Cr: 18.0～20.0, Ni: 8.0～10.5, S: ≤0.03, P: ≤0.035 N≤0.1. Compared with 304L 304L is more corrosion resistant and contains less carbon. 304 is wid...Read more -
Duplex stainless steel
Duplex stainless steel Duplex stainless steel (DSS) refers to stainless steel with ferrite and austenite accounting for about 50% each, and the content of the minor phase generally needs to reach at least 30%. In the case of low C content, the Cr content is 18%~28%, and the Ni content is 3%~10%. ...Read more -
steel sheet pile
Steel Sheet Pile According to the production process, steel sheet pile products are divided into two types: cold-bent thin-walled steel sheet piles and hot-rolled steel sheet piles. (1) Cold-bent steel sheet piles are divided into two types: non-bite cold-bent steel sheet piles (also called chan...Read more -
12Cr1MoVg boiler tube
12Cr1MoVg boiler tube 12Cr1MoVg boiler tube is an alloy high-pressure boiler tube, which belongs to alloy steel. 12cr1movg boiler tube is based on high-quality carbon structural steel, and one or more alloy elements are appropriately added to improve the mechanical properties, toughness and harde...Read more -
Steel strand-reinforcing seven-wire rope
Steel strand-reinforcing seven-wire rope Steel strand is a steel product consisting of multiple steel wires twisted together. The surface of carbon steel can be coated with galvanized layer, zinc-aluminum alloy layer, aluminum clad layer, copper plating layer, epoxy coated layer, etc. as needed. ...Read more