There are two commonly used classification methods for rebar: one is to classify by geometric shape, and to classify or type according to the cross-sectional shape of the transverse rib and the spacing of the ribs. Type II. This classification mainly reflects the gripping performance of the rebar. The second is based on performance classification (grade), such as my country’s current implementation standard, rebar is (GB1499.2-2007) wire is 1499.1-2008), according to the strength level (yield point/tensile strength) The rebar is divided into 3 grades; in the Japanese Industrial Standard (JI SG3112), the rebar is divided into 5 types according to the comprehensive performance; in the British Standard (BS4461), several grades of the rebar performance test are also specified. In addition, rebars can also be classified according to their uses, such as ordinary steel bars for reinforced concrete and heat-treated steel bars for prestressed reinforced concrete.
Rebar is a ribbed steel bar on the surface, also known as ribbed steel bar, usually with 2 longitudinal ribs and transverse ribs evenly distributed along the length direction. The shape of the transverse rib is spiral, herringbone and crescent shape. Expressed in millimeters of nominal diameter. The nominal diameter of a ribbed bar corresponds to the nominal diameter of a round bar of equal cross-section. The nominal diameter of the rebar is 8-50 mm, and the recommended diameters are 8, 12, 16, 20, 25, 32, and 40 mm. Ribbed steel bars are mainly subjected to tensile stress in concrete. Due to the action of ribs, ribbed steel bars have greater bonding ability with concrete, so they can better withstand the action of external forces. Ribbed steel bars are widely used in various building structures, especially large, heavy, light thin-walled and high-rise building structures.
Rebar is produced by small rolling mills, and the main types of small rolling mills are: continuous, semi-continuous and tandem. Most of the new and in-use small rolling mills in the world are fully continuous. Popular rebar mills are general-purpose high-speed rolling rebar mills and 4-slice high-production rebar mills.
The billet used in the continuous small rolling mill is generally continuous casting billet, the side length is generally 130~160mm, the length is generally about 6~12 meters, and the single billet weight is 1.5~3 tons. Most of the rolling lines are alternately arranged horizontally and vertically, to achieve torsion-free rolling across the line. According to different billet specifications and finished product sizes, there are 18, 20, 22, and 24 small rolling mills, and 18 is the mainstream. Bar rolling mostly adopts new processes such as stepping heating furnace, high-pressure water descaling, low-temperature rolling, and endless rolling. Rough rolling and intermediate rolling are developed to adapt to large billets and improve rolling accuracy. Finishing mills are mainly Improved accuracy and speed (up to 18m/s). The product specifications are generally ф10-40mm, and there are also ф6-32mm or ф12-50mm. The steel grades produced are low, medium and high carbon steel and low alloy steel that are widely needed in the market; the maximum rolling speed is 18m/s. Its production process is as follows:
Walking furnace→roughing mill→intermediate rolling mill→finishing mill→water cooling device→cooling bed→cold shearing→automatic counting device→baling machine→unloading bench is provided by Shanghai Jiuzheng Environmental Protection Building Materials Co., Ltd. to provide theoretical weight calculation of rebar Formula: Outer DiameterХOuter DiameterХ0.00617=kg/m Specifications Weight Manufacturer 6.50.260 Jiuzheng Iron and Steel 8.00.395 Jiuzheng Iron and Steel 100.617 Jiuzheng Iron and Steel 120.888 Jiuzheng Iron and Steel 141.21 Jiuzheng Iron and Steel 161.58 Jiuzheng Iron and Steel 182.00 Jiuzheng Iron and Steel 202.47 Jiuzheng Iron and Steel 222.98 Jiuzheng Iron and Steel 253.85 Jiuzheng Iron and Steel 284.83 Jiuzheng Iron and Steel 326.31 Jiuzheng Iron and Steel.
Post time: Aug-22-2022