-
Hot Cold Rolled Pickled Oiled Steel Plate Coil
Thickness: 1.6-6mm
Width: 850-1650mm
S235JRM1, S235J0M1, S235JRM2, S235J0M2
-
HR iron plate Hot rolled mild ms steel sheet
The steel plate is flat, rectangular and can be directly rolled or cut from wide steel strips.
A branch of the steel plate is the steel strip. The steel strip is actually a very long thin plate with a relatively small width. It is often supplied in coils, also known as strip steel. Steel strips are often produced on multi-rack continuous training machines, and are cut to length to form steel strips.
-
Q345/S355JR Steel Plate Hot Rolled Mild Steel Sheet For Decoration and Construction
Carbon steel plate is a steel plate without alloying elements, or a steel plate with only Mn. It is a kind of steel with a carbon content of less than 2.11% and no special addition of metal elements. It can also be called ordinary carbon steel or carbon steel. Plain steel. In addition to carbon, there are also a small amount of silicon, manganese, sulfur, phosphorus and other elements in it. The higher the carbon content, the better the hardness and strength, but the plasticity will be worse.
-
Color Coated PPGI GI Prepainted Galvanized Roofing Sheet Coils
The hot-rolled steel plate is made of continuous casting slab or blooming slab as raw material, which is heated in a walking furnace, descaled by high-pressure water, and then enters the rough rolling mill. Rolling, after the final rolling, it goes through laminar cooling (computer-controlled cooling rate) and coiling by a coiler to become a straight coil. The head and tail of the straight hair curler are often tongue-shaped and fish-tail-shaped, with poor thickness and width accuracy, and the edges often have defects such as wave shape, folded edge, and tower shape. Its coil weight is heavier, and the inner diameter of the steel coil is 760mm
-
Deformed Steel Bar Rebar Iron Rod Hot Rolled Steel Rebars
Thickness: 6-40mm
Process: Hot Rolled, Ribbed, Rounded, Alloy
Rebar is a common name for hot-rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar consists of HRB and the minimum yield point of the grade. H, R, and B are Hotrolled, Ribbed, and Bars respectively.
-
Medium Thickness S235JR/ S275JR/ S355JR Hot Rolled Carbon Steel Plate
Q345GJ(B, C, D, E), Q460GJ(C, D, E) SN400(A, B, C), SN490(B, C) 355EMZ, 450(EM, EMZ)
Medium and heavy plates refer to steel plates with a thickness of 4.5-25.0mm, thick plates with a thickness of 25.0-100.0mm, and extra-thick plates with a thickness of more than 100.0mm.
Thickness: 4-60mm
Width: 500-3000mm